TOP PAGE > Function Appealing Grade > Medical Grade of Polyacetal Iupital™ MA Series

Medical Grade of Polyacetal Iupital™ MA Series

The Iupital MA series meets the quality and regulatory requirements for medical materials, and is suitable for applications such as drug inhalers for COPD and asthma, injection devices such as insulin pens, and parts for medical devices.

The MA series is available in a range of standard, high-flow, high-rigidity, and low-friction grades, enabling greater design flexibility for medical devices and equipment, which are becoming smaller and lighter.

In particular, the low-friction grade MAL20 has greatly improved sliding performance with POM. In the past, combining POM parts would generate squeaking noise and friction, so designs would combine different materials in order to avoid these issues. MAL20 suppresses friction and wear, even when combined with ordinary POM, achieving quiet, smooth movement, which greatly improves comfort when used in medical devices.

In addition, with the MA series, we will offer a coloring masterbatch for color mixing. We support parts design not only in terms of physical characteristics, but also in terms of visual design.

Basic Information on the Iupital ™ MA Series

Features

  • ・We offer a variety of grade groups in addition to the standard grades, including high flow, high rigidity, and low friction
  • ・Masterbatch coloring available
  • ・Worldwide sales and technical support

Grade Lineup

  • MAS20 Standard The most common physical properties and flowability
  • MAS30 High flow Suitable for precision molding
  • MAH25 High rigidity Suitable for making thinner walls and increasing strength
  • MAL20 Low-friction Contributes to low-noise designs with low sliding resistance

Supported Standards, Etc.

  • ・ISO10993-5, 10
  • ・USP <87>
  • ・USP <88> Class VI
  • ・FDA Drug Master File

Physical Properties

Physical Properties

Injection molding condition

  • Pre-drying 80℃ 3~4hrs
  • Cylinder temperature (Rear) 170~180℃
  • Cylinder temperature (Middle) 180~190℃
  • Cylinder temperature (Front) 190~200℃
  • Nozzle temperature 180~210℃
  • Injection pressure 50~100MPa
  • Injection speed Medium speed
  • Screw rotation 80~120rpm
  • Mold temperature 60~80℃
お問い合わせ

Product Info.

  • ポリカーボネート樹脂(PC樹脂)ユーピロンノバレックスザンター
  • ポリブチレン テレフタレート樹脂 (PBT樹脂) ノバデュラン
  • ポリアセタール樹脂(POM樹脂)ユピタール
  • 変性ポリフェニレン エーテル樹脂(m-PPE樹脂)ユピエースレマロイ
  • 高性能ポリアミド樹脂(PA樹脂)レニー
お問い合わせ

PAGE TOP



Are you direct sales contacts of MEP materials ?

We kindly ask you to request in accordance with your sales channels